Products > Car Imaging > IH30-ANA001


 
Together with the Nickl ImageCutter30, the ImageHub30-ANA001 is able to put images to the dashboard display of various vehicles. The ImageHub30-ANA001 gets its signal from the ImageCutter, which has already tailored the signal timing to the needs of the specific car interface. The ImageHub30 does the physical adaption. For savety purposes, the original image can be displayed alternatively. E.g. safety-relevant information can be displayed at critical situations.

The supply of the very compact Nickl ImageHub30-ANA001 comes from the ImageCutter30, easing the integration into the target car.

Transmission of the signals between the ImageCutter and the ImageHub is done via standard patch cables known from the network technique. By AC coupling, a DC decoupling of the ImageCutter and ImageHub is achieved, allowing potential differences which may be present between the front and the rear area of the wiring harness.
Particular features
  • Multiplexing between original image and PC/Video image
  • DC De-coupling of ImageHub30 and ImageCutter30
  • Obtains supply from ImageCutter30
Order Data: 1EMIH30-ANA001

Selected configuration:

Vehicle Display unit
Model: Volkswagen Golf 5
Type: 1K

Time frame: 2003...2008
 Name: RNS-MFD2
Display size: 6.5"
Resolution: 400 x 234 pxl
Technology: (analogous RGB)


Cable from ImageCutter to ImageHub:
RJ45 cable
Cable from ImageHub to Display unit:
IH30 cable 4-channel LVDS/an.RGB (CCC/RNS-E/-MFD2)
Modification see integration.

ImageCutter30-CD

In order to put images to an integrated dashboard display, the Nickl ImageCutter30-CD tailores the image geometries and timings to fit the needs of the dashboard display. This signal can then be put to the display interface via th...

IH30 cable 4-channel LVDS/an.RGB (CCC/RNS-E/-MFD2)

Universal cable for connecting devices wirh 0.64 mm² headers with a 2.54 mm contact pitch. At the 10-pole cable, at the one end the ten contacts are mounted in a 10-pole carrier and at the other end the ten contacts are mounted i...

RJ45 cable

Colored twisted pair with F / UTP foil shield. These cables are used to connect between network devices and a Ethernet Repeater. They are also used for the specific connection of a ImageCutter30 and a ImageHub30. The connectors ar...